Document is current
Any future updates will be listed below
-
Authors
Katsuno, Eduardo Tadashi https://orcid.org/0000-0003-2818-3518
Dantas, João Lucas Dozzi https://orcid.org/0000-0002-6482-0222
Silva, Emílio Carlos Nelli https://orcid.org/0000-0003-1715-1713
-
Funding
Funding for this research was provided by:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (302658/2018-1)
Financiadora de Estudos e Projetos (CTInfra - 01.18.0082.01)
- License Information
-
More Information
Article History
Received: 28 December 2021
Revised: 17 June 2022
Accepted: 20 July 2022
First Online: 13 September 2022
Declarations
:
: The authors declare that they have no conflict of interest.
: With the presented procedures, it is expected to be possible to apply the formulation in other CFD or optimizer software: Fig. describes the dimensions and information on how to replicate the adopted propeller. Section presents all the dimensions to recreate the domain for CFD simulations and the adopted boundary conditions. Section describes all adopted volumes of refinement to obtain the same mesh topologies. Section shows the CFD setup, as the value for some constants, such as the density and viscosity. Section describes the optimization flowchart. The framework of communication between the CFD and the optimizer is the same as previous work, described in the <i>Replication of results</i> section in Katsuno et al. ().
