Document is current

Article History

Received: 28 July 2020

Accepted: 13 June 2021

First Online: 3 July 2021

Declarations

:

: PhD. Celso Eduardo Cruz González, PhD. Benjamín Vargas Arista, Hugo Gamez Cuatzin, Diego Camacho, Alfredo Canto, Ricardo Villarreal Colin, Andres Castillo Garcia, Antonio Valdez Aguayo, José Luis Rice Ramírez, and Isidro Guzmán Flores designate as corresponding author the PhD. Celso Eduardo Cruz Gonzalez will be the link between the International Journal of advanced manufacturing technology in the presentation of the article “On the manufacture of naval propellers by using self-hardening sand molds made by robotic arms” with manuscript number JAMT-D-20-02995R1. In our research, we reflected the results of machining self-hardening sand blocks by means of a robotic arm where two naval propellers In this Ethical approval, we establish the following: this manuscript has not been sent to another journal for review and publication. Animals, humans, and any living being were not used in the present investigation. In this investigation an ABB®; robotic arm was employed. We have no conflict of interest with any institution, our investigation is an original investigation in which there was no help or financial support from any public or private institution in our country Mexico. The personal data and affiliation data of the authors of this article are true and can be used by the IJAMT magazine. We the authors authorize the possible publication of this article, because our publication is original, and we have no conflict of interest.

: PhD. Celso Eduardo Cruz González, PhD. Benjamín Vargas Arista, Hugo Gamez Cuatzin, Diego Camacho, Alfredo Canto, Ricardo Villarreal Colin, Andres Castillo Garcia, Antonio Valdez Aguayo, José Luis Rice Ramírez, and Isidro Guzmán Flores designate as corresponding author the PhD. Celso Eduardo Cruz Gonzalez; for this reason, we give our consent to participate in the review process, evaluation, and publication of the article “On the manufacture of naval propellers by using self-hardening sand molds made by robotic arms”.

: We the authors, PhD. Celso Eduardo Cruz González, PhD. Benjamín Vargas Arista, Hugo Gamez Cuatzin, Diego Camacho, Alfredo Canto, Ricardo Villarreal Colin, Andres Castillo Garcia, Antonio Valdez Aguayo, José Luis Rice Ramírez, and Isidro Guzmán Flores, consent and approve the publication of this article with identification number JAMT-D-20-02995R1.

: The authors declare no competing interests.