Document is current
Any future updates will be listed below
-
Authors
Barman, Shubhankar
Paul, Swadesh
Ranjan, Priya
Das, Surajit
Datta, Anuja https://orcid.org/0000-0002-4411-8639
-
Funding
Funding for this research was provided by:
Science and Engineering Research Board (SB/S2/RJN-0057/2017, CRG/2020/002395)
- License Information
-
More Information
Article History
Received: 14 December 2022
Accepted: 24 March 2023
First Online: 13 April 2023
Declarations
:
: The authors declare no competing financial or ethical interest.
: Not applicable.
: Experimental set-up description for the measurement of piezoelectric voltage and current with the change in the different forces and frequencies. Table for comparison of the lattice parameters and volumes of LN-type ZnTiO<sub>3</sub> bulk and the current manuscript. Table showing performance comparison of different piezo-energy harvesters. Powder XRD pattern after annealing from ZTO-1 for 6 h at 600 °C. UV–Vis absorption spectrum, EDS and Curie–Weiss fit for ZTO-2. Ferroelectric hysteresis loops of ZTO-1 before annealing. Frequency and temperature-dependent P–E loops of ZTO-2. Table with polarization values at different temperatures of measurements of ZTO-2. PFM topography image of ZTO-2. Variation of the piezoelectric short-circuit current varying with the force, frequency, different bending angles and temperatures. COMSOL details.
